Roofing dumpster rental in Portland
Need a roll-off dumpster in Portland pulled the same day shingles are torn off? We drop one fast and haul it when you’re done.
Roofing Tear-off Dumpster Sizing by Squares
How big a roll-off do you actually need for your Portland roof? Most asphalt shingles follow a simple conversion rule: each square requires two-thirds of a cubic yard of space. The 20-yard container is our standard low-wall roll-off; it manages the tonnage for typical residential projects while keeping loading heights manageable throughout Multnomah.
15-Yard Roofing Dumpster
- Capacity: 15 cubic yards
- Fits: 15–20 squares of asphalt shingle
- Best for: Single-layer ranch and bungalow tear-offs
The 10-yard can fits a tight driveway and manages shingle weight within the legal tonnage for one single haul.
20-Yard Roofing Dumpster
- Capacity: 20 cubic yards
- Fits: 25–30 squares of asphalt shingle
- Best for: Most two-story residential tear-offs
The 20-Yard Container is the roofing workhorse because low side walls let crews ground-throw shingles without extra scaffolding.
30-Yard Roofing Dumpster
- Capacity: 30 cubic yards
- Fits: 35–45 squares of asphalt shingle
- Best for: Multi-layer tear-offs and small commercial roofs
The 30-yard bin keeps big tear-offs moving—no second haul-out clogs crew demobilization on tight schedules.
Asphalt Shingle Weight and Tonnage Planning
Roofers route three-tab shingles at about 250 pounds per square; architectural laminate runs closer to 400. Each 25‑square tear‑off lands three to five tons before underlayment is added, so the hooklift truck must weigh and cap the load inside the weight limit. How does that translate to a 10‑yard dumpster? The smaller can keeps tonnage within a single pickup haul.
When you mix shingles with framing or sheathing offcuts, the job requires a general construction container—we route these loads as c&d debris instead of roofing. Pure asphalt tear-offs remain on our standard, simplified service line for your project.
Driveway Placement for Roofing Crew Workflow
We angle the swing-door of our Roll-Off Container Rental toward the eave to keep the workspace clear. Before we set the can, we place Driveway Boards under the rollers to protect your concrete in Portland. We suggest a six-foot tarp perimeter for an easy nail sweep after you review proper roof tear-off container sizing. Proper staging allows for efficient asphalt shingle disposal best practices guide compliance during your next project.
Drop angle
Rear door toward the roof line
Set the swing-door end of the unit facing the eave to align your walk-in loading path with the ground-throw debris area.
Surface protection
Wooden planks under every roller
Loaded shingle weight will gouge unprotected concrete; driveway boards stay under the rear rollers for the full rental window.
Sweep zone
Six-foot tarp perimeter
Stage magnetic sweepers on the tarp side to keep nail cleanup running in parallel with the loading process.
Tile, Slate, and Metal Roof Tear-off Containers
Concrete tile, natural slate, and standing-seam metal weigh significantly more than asphalt: these materials punish a container not built for high-density loads. We route a reinforced 30-yard bin with a heavier floor plate and ribbed sides to handle the stress; we also cap fill volume below the rim to ensure axle weight stays legal. We haul these using a low-wall lowboy for stability. For lighter mixed loads, consider our general construction debris service.
Same-day Pickup for Fast Roof Project Turnover
Tear-offs run tight; the roll-off shouldn’t hold things up. Dispatch coordinates same-day haul-out to clear the container before final inspection or gutter reinstall. We pull the 20-Yard Roll-Off midday and route it straight to the transfer station. Crews across Portland and dispatch across Multnomah keep the site clean on schedule.